Revolution Upfitting Revolution Upfitting
Pickup bed under a cap fitted with a two-drawer TruckVault storage system

Lockable Drawer Systems for Working Trucks

Truck Bed Storage & TruckVault Drawers in Omaha & Lincoln, NE

Request a truck bed storage quote Talk through your build with our team
Overhead view of an organized pickup bed with Milwaukee Packout cases, strapped rack parts, and a retractable bed cover

An open truck bed treats a cordless tool kit the same way it treats a bag of sand — exposed, unsecured, and one storm away from a loss. We design and install truck bed storage systems, including TruckVault secure drawer units, for contractors, service technicians, and outdoor enthusiasts across Omaha and Lincoln and eastern Nebraska. As a family-owned upfitter, we treat every bed like our own: measured carefully, configured around your gear, and finished with hardware that locks, rolls, and seals the way it should. Request a truck bed storage quote or talk through your build with our team.

What a Locked, Organized Bed Changes About Your Workday

A drawer system is not a truck accessory — it is a working decision about security, weather, and wasted minutes. This is what our customers tell us changed after the install:

Real Security for Expensive Tools

A tarp hides your tools; a locked steel drawer defends them. TruckVault and WeatherGuard storage products are engineered around keyed security, rigid construction, and concealed contents, so what rides in your bed stops being an advertisement to anyone walking past a job site or parking lot. That protection follows the truck everywhere it parks — job site, supply house, your own driveway.

Weather Protection That Rides Along

Rain, snow, and road spray shorten the life of everything an open bed carries. Enclosed drawers shield tools, electronics, and gear from the elements every mile of the drive, which matters through a full Nebraska winter far more than most owners expect. Dry tools last longer, hold calibration, and show up ready to work.

An End to the Bed Dig

When every tool has an assigned drawer and divider, the fifteen-minute excavation before each task disappears. You open the right drawer, take the right tool, and get to work — and you can see at a glance when something didn't make it back. Multiply the saved minutes across a season and the system pays for itself in recovered time.

Configured Around Your Truck and Your Trade

Drawer counts, depths, dividers, and deck options are matched to your specific make, model, and bed length, then to the gear you actually carry. We build storage for the way you work, not a one-size guess. The result feels factory-built because it was designed for that truck alone.

A Family-Owned Shop That Treats Storage as an Investment

A secure drawer system should outlast the truck it rides in, and a family business answers for that longer than a sales quota does. Get to know the people behind our shop — we intend to be the upfitter you come back to for the next truck too.

Workmanship We Put in Writing

Our installs are backed by warranty-supported workmanship on top of the manufacturer backing that comes with the products we install. Read about how our warranty coverage works before you buy — we would rather earn trust on paper than ask for it.

Rear view of a white pickup with the tailgate down, showing Milwaukee Packout cases and gear secured in the bed

Tell Us What Rides in Your Bed

The quote form takes a couple of minutes: your truck's year, make, model, and bed length, plus a quick description of the tools and gear you need secured. From there we can talk configurations and product options. Many truck builds also pair bed storage with heavy-duty ladder racks for overhead material, steps and running boards for easier access, or grow into a standardized fleet upfitting program once the first build proves itself. Photos of the bed as it sits today are welcome — mess included, since the mess is usually the best map of how you actually work.

Request a truck bed storage quote

Truck Bed Storage in Action

Tie-down floor systems and slide-out drawer units that turn an open bed into organized, secured storage — tap any photo to see it larger.

Bed Boss tie-down floor in a white pickup bed with tool cases strapped to the anchor points
Pipe and a pipe stand strapped down to a Bed Boss floor system with orange ratchet straps
Technician in a safety vest reaching into slide-out truck bed drawers loaded with power tools
Gray pickup with a two-drawer truck bed storage system pulled out past the open tailgate

From Open Bed to Organized Vault: How We Build It

Every storage install follows the same disciplined path, whether it is a single locking drawer or a full bed system. If you are new to upfitting altogether, our guide to what vehicle upfitting involves is a useful primer before the first conversation.

1

Gear Inventory and Bed Measurement

We begin with your truck and your load, not a catalog. This step decides everything that follows.

Measure bed length, width, depth, and wheel-well intrusion on your exact truck

Inventory the tools, cases, and gear the system needs to hold

Note weight-heavy items that affect drawer and slide selection

Check compatibility with any existing tonneau cover, cap, or rack

Talk through how you load, unload, and work out of the bed day to day

Discuss security priorities — what must lock up versus what simply needs a home

2

Drawer System Selection and Configuration

With real measurements in hand, we configure the system around your answers rather than forcing your gear into a stock layout. Product selection is where an upfitter's experience earns its keep — the catalog is wide, and fit is everything.

Select the product platform, drawing on TruckVault and other proven storage lines

Set drawer count, depths, and divider layouts around your inventory list

Choose lock hardware and finish options for the conditions you work in

Plan the top deck so hauling space stays usable above the drawers

Weigh configurations against how often each tool leaves the truck

Review the full configuration with you before anything is ordered

3

Bed Preparation and Fit Check

A clean, planned bed is the difference between a system that rattles and one that feels factory-built.

Inspect and clean the bed surface and existing anchor points

Map mounting locations against the truck's structure

Dry-fit the unit to verify clearances at the tailgate, wheel wells, and cab

Protect the bed finish and surrounding panels during the work

Confirm final placement with you before fastening begins

Stage components and hardware so the install proceeds exactly as planned

4

Mounting, Alignment, and Security Testing

Installation day is about precision — a drawer system only earns its keep if it operates smoothly under a real load. We treat alignment and lock function as pass-fail items, never close-enough.

Anchor the system to planned mounting points so it stays planted

Align drawers for smooth, full-extension travel

Cycle and test every lock, latch, and slide

Verify operation with weight in the drawers, not just empty

Re-check clearance with the tailgate closed and any cover in place

Confirm finished height and access work with your loading habits

5

Load-In Walkthrough and Handoff

We finish by loading the system with you, because an organized bed is the actual product — the drawers are just how we get there.

Place your tools and gear into the layout together and adjust dividers on the spot

Demonstrate lock operation and daily-use habits that extend hardware life

Review care guidelines for seals, slides, and finishes

Walk through how this build connects with our other vehicle upfitting services

Hand over documentation for the products installed

Answer every operating question before the truck leaves our shop

Truck Bed Storage Questions We Hear in Omaha & Lincoln

TruckVault builds drawer systems around specific makes, models, and bed lengths, so fitment starts with your exact truck rather than a universal box. During our assessment we measure bed dimensions, account for wheel wells and tie-down locations, and confirm compatibility with any cover or cap already installed. That measurement step is how we make sure the finished system fits tight and functions correctly. That is also when we flag anything unusual about your bed.

In many cases, yes — drawer systems are commonly paired with covers and caps because the combination adds a second layer of security and weather protection. Compatibility depends on the height of the drawer unit and the clearance your cover provides, so bring the truck in as it sits. We evaluate the pairing during design and configure the system so both components work together. New covers can be part of the plan as well.

A locking drawer system is a serious deterrent: rigid construction, concealed contents, and keyed locks mean a thief cannot see what is inside or reach it with a quick grab. No storage product makes a truck theft-proof, and we will not claim otherwise, but moving tools from an open bed into a locked drawer removes the easy opportunity behind most job-site theft. Locked and out of sight beats visible and hopeful every time.

Weather protection is one of the main reasons crews in Nebraska invest in enclosed bed storage. Drawer systems shield contents from rain, snow, and road spray far better than open-bed hauling, and pairing the system with a cover or cap adds another barrier. We talk through how weather-exposed your truck is and configure the build accordingly. Dry gear is ready gear, every season.

Capacity varies by manufacturer, model, and drawer configuration, so we do not quote one universal number. What matters is matching the system to your actual load — a finish carpenter's kit and a mechanic's field set are very different weights. We review what you carry during the design step and select a system its manufacturer rates for that kind of load. That match is what keeps slides running smoothly for the long run.

You trade some open volume for organization, but a well-designed system accounts for hauling. Low-profile drawer units keep a flat, usable deck on top, which many owners find more practical than a bare bed. During design we look at what you haul — plywood, equipment, materials — and choose a configuration that preserves the deck space you actually use. Bring your worst hauling day to the design conversation and we will plan for it.

That is the whole point of a custom configuration. We set drawer depths, dividers, and layouts around the way you work — parts organization for a service tech, long compartments for hunting and outdoor gear, padded storage for test equipment. Tell us what rides in the bed today and what frustrates you about it, and we design around exactly that. The best configurations come from honest lists, not perfect ones.

Mounting methods depend on the system and the truck. Where possible we use existing anchor points and factory tie-down locations, and when additional fastening is needed we plan it deliberately and review the approach with you before any work begins. Either way, the goal is a system that stays planted under load without compromising the bed itself. You will know exactly how the system attaches before you approve the build.

Many drawer systems can be removed and reinstalled, though fitment in a different bed depends on dimensions and mounting compatibility. If you replace trucks on a regular cycle, tell us during design — we can factor a future transfer into the configuration we recommend. When the time comes, we can evaluate the new truck and handle the changeover properly. Plan the system once and let it serve two trucks.

Absolutely — drawers below and a rack above is one of the most productive truck configurations we build. The storage system organizes and secures what is in the bed while the rack carries ladders and long material overhead. We plan both at the same time so mounting points, clearances, and load paths work together. Contact our team to design the full setup.

Truck Bed Storage Installs Across the Omaha and Lincoln Regions

Builds happen at our shop in Omaha, and working trucks come to us from across the metro and well beyond — wherever the truck works, the standard of the build stays the same:

  • Omaha — our home base and where most of our truck builds begin
  • Lincoln — a straight shot down the interstate for a proper build
  • Papillion — contractors and service techs across southern Sarpy County
  • La Vista — work trucks from one of the metro's busiest trade corridors
  • Bellevue — crews serving the southeast metro
  • Elkhorn — builders across the fast-growing west metro
  • Bennington — northwest metro trades and acreage owners
  • Nebraska City — southeast Nebraska crews and outdoorsmen
  • Grand Island — central Nebraska operations that want it done right
  • Kearney — worth the drive for owners further west
  • Kansas City, MO — regional crews who make us part of the route
Truck Bed Storage Installs Across the Omaha and Lincoln Regions Truck Bed Storage Installs Across the Omaha and Lincoln Regions

Complete the Rest of Your Work Truck

A locked bed is one piece of a productive vehicle. These builds pair naturally with a storage system:

Van shelving systems

Sortimo and Holman shelving that brings the same organization discipline to the vans in your operation.

TruckVault secure storage

The full TruckVault lineup, from open-bed pickup drawers to SUV, sedan, and van systems. Worth a look if your operation runs more than pickups.

Box truck upfitting

Full interior builds that turn an empty cargo box into an organized mobile workspace. The same organization thinking, scaled up to your biggest vehicle.

SmartCap truck caps

A stainless-steel SmartCap encloses the whole bed over your drawers, adding a lockable roof and gullwing side access to the stored gear.

Secure Your Gear and Get Back to Work

Every week a truck runs with an open, disorganized bed, it costs you something — a soaked tool that will not hold a charge, twenty minutes of digging before a two-minute task, or the sick feeling of a parking-lot theft you saw coming. A truck bed storage system is how working owners in Omaha retire those problems in one decision. Locked, weatherproof, organized, and built around your exact truck and trade. It is the difference between a truck that hauls tools and a truck that manages them.

What you get from us is a build, not a box. We measure your bed, inventory your gear, configure a system from proven product lines like TruckVault, and install it with the precision that keeps drawers rolling smoothly years from now. Then we load it with you, so day one on the new system is already faster than the old routine. If you still have general questions about how upfitting projects come together, our vehicle upfitting FAQ covers the basics.

The next step is simple: tell us about your truck and what it carries. We will come back with a configuration that fits your bed, your gear, and the way you work — explained plainly, without pressure. Whether it is one personal truck or the first of several work vehicles, the build gets our full attention as your trusted Nebraska upfitter. Most owners tell us the hardest part was living without a system for as long as they did.

Request Your Storage Quote Set Up a Design Consultation
Red Barn Media Group

© Red Barn Media Group 2026